Home > Galvanized Steel> GI/GL/GF
 
GI/GL/GF
  • GI--Zinc Coated Steel
  • GL--55% Al-Zn Coated Steel
  • GF--5% Al-Zn Coated Steel
    		•
    Hot-Dip Galvanized Steel (GI: Zinc Coated Steel)
    Aluminum-plates the zinc base alloy steel plate
    "HOT DIP GALVANIZED (ZINC COATED) STEEL, GALVALUME AND GALFAN " have been the "ALL PURPOSE " product providing good performance and weathering resistance and service life in applications where protection against corrosion of the steel base has been an important requirement.
    Hot-dipped Al-zinc steel in 55% aluminum appears no rust after 20 years application. Steel sheet only with zinc coating or 4% aluminum galvanization appears rust after about 10 years. Steel sheet with 7% aluminum galvanization appears rust after 9 years.
    Measured result of weight loss owing to corrosion shows the fact that steel sheet with 55% aluminum galvanized can be free from rust for minimum 50 years.
    Its base material is aluminum galvanized steel with 55% aluminum. Duration free from rust can last at least 50 years.
    Material SPCC for normal building and mechanical clutch
    SPCD for deep-drawing
    SPCE for ultra-deep drawing
    Applications Buildings and Construction Floor Decks, Ceilings, Duct Work, Roofing, Siding, Sashes, Beams, Fences, Verandas, Shutters, Awnings, Partitions, Indoor Decorations, Pipes, Ventilators, Sheds, Culverts.
    Transportation Body Pane, Air Cleaners, Oil Filters, Fuel Tanks, Containers, Highway Barriers.
    Appliances Light Fittings, Washing Machines, Dryers, Coolers, Vending Machines, Water Heaters, Stoves, Refrigerators, Freezers, Tool Boxes.
    Agriculture Barns, Dryer Panels, Animal Houses, Hoppers. Bar Supporters, Irrigation Systems, Green houses.
    Others Furniture and Office Equipment, Entertainment Machines, Car Ports, Garden and Storage Sheds.
    Hot-Dip Galvanized Steel Coils (Zinc Coated)
    Specifications JIS G3302 1998 ASTM A653M / A924M 1998
    SGCC
    SGC
    340
    400
    490
    570    		 SGCH SGCD1
    SGCD2    		 SGCD3

    SGHC
    SGH
    340
    400
    490

    490    		 CS
    Type
    A
    B
    C
    FS
    Type
    A
    B    		 SS
    Grade
    230
    255
    275
    340    		 SS
    Grade
    550    		 DDS
    EDDS
    Thickness of Base Steel
    (mm)    		 0.15
    /
    2.00    		 0.15
    /
    1.00    		 0.40
    /
    1.60    		 0.60
    /
    1.60    		 1.20
    /
    4.50    		 0.15
    /
    4.50    		 0.25
    /
    4.50    		 0.25
    /
    2.00    		 0.60
    /
    4.50
    Coating Mass Regular
    Spangle    		 Z08,Z12,Z18,Z20,
    Z22,Z25,Z27,
    Z35,Z45    		 Z08
    /
    Z27    		 Z10
    /
    Z45    		 Z120,Z180,
    Z275,Z350,
    Z450    		 Z120
    Z180
    Z275
    Minimized
    (Zero)
    Spangle    		 Z08,Z12,Z18,Z20,
    Z22,Z25,Z27,
    Z35,    		 Z08
    /
    Z27    		 Z18
    /
    Z35    		 Z120,Z180,
    Z275,Z350,

    Z120
    Z180

    Z275
    Galvan nealed F10,F12,F18   ZF120,ZF180
    Surface Finish Regular Spangle, Minimized Spangle, Extra Smooth and Galvan nealed
    Surface Treatment Chromating Treatment, Oiled or Resin Coated (Anti Finger Print)
    Coating Thickness Min. Single Side coating Thickness: 50 g/m’
    Max. Single Side coating Thickness: 225 g/m’
    Remarks Tolerance for thickness, width, flatness and so on… can conform to the requirements of JIS G3302 or ASTM A653M / A924M.
    All products with thickness 2.0mm and under can be skin passed.
    The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 will be the same as for thickness 1.6mm and over.
    Coil inside diameters can be either 508mm or 610mm, maximum coil outside diameter is 2000mm. Weight of a single coil can be from 5 to 30 metric tons.
    The specification of ASTM such as A653M, A792M, A875M / A924M and etc. have been updated to the latest revisions.
    Hot-Dip Galvafan / Galvalume Steel Coils (Al-Zn Coated)
    Product Name Galfan
    (5% Al-Zn Coated Steel Coil)    		 Galvalume
    (55% Al-Zn Coated Steel Coil)
    Specifications JIS G3317 1994 ASTM A875M 1997
    ASTM A924M 1997    		 JIS G3321 1998 ASTM A792M 1997
    ASTM A924M 1997
    SZAHC
    SZAHC
    340
    400
    440    		 SZACC
    SZAC
    340
    400
    440    		 Commercial
    Steel Type
    A
    B
    C    		 Forming
    Steel Type
    A
    B

    C    		 Structural
    Steel Grade
    230
    255
    275
    340    		 Structural
    Steel Grade
    550    		 SGLCC
    SGLC
    400
    440
    490
    570    		 SGLCD CS
    Type
    A
    B
    C
    FS    		 SS Grade
    230
    255
    275
    345
    550
    Thickness of
    Base Steel
    (mm)    		 1.20
    /
    4.50    		 0.30
    /
    1.25    		 0.70
    /
    4.50    		 0.25
    /
    2.00    		 0.15
    /
    1.25    		 0.15
    /
    1.25    		 0.15
    /
    1.25    		 0.15
    /
    1.25
    Coating Mass Y08
    Y10
    Y12
    Y18
    Y20
    Y22
    Y25
    Y27
    Y35
    Y45    		 ZGF 90
    ZGF135
    ZGF180
    ZGF225
    ZGF275
    ZGF350
    ZGF450    		 AZ 90
    AZ120
    AZ150
    AZ170    		 AZ150
    AZ165
    AZ180

    Surface

    Finish    		 Regular Spangle, Minimized Spangle Regular Spangle

    Surface

    Treatment    		 Chromating Treatment, Oiled or Resin Coated (Anti Finger Print)
    Coating Min. Single Side coating Thickness: 50 g/m’
    Thickness Max. Single Side coating Thickness: 225 g/m’
    Major Applications For Construction:? Floor Deck,Celling,Shutter,Air Condition Duct.
    For Electric Appliance: Shell of Freezer,Switch Box,Refrigerator,Washing Machine ete.
    For Transportation: Soundproof Wall,Road Handrail,Vehicle body,Exhaust Pipe,Air Cleaner.
    For Furniture and Other: Office Chair & Desk,File Cabinet,Vending machine,Garbage Can.
    Remarks 1.Tolerance for thickness, width, flatness and so on… can conform to the requirements of JIS G3302 or ASTM A653M / A924M.
    2.All products with thickness 2.0mm and under can be skin passed.
    3.The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 will be the same as for thickness 1.6mm and over.
    4.Coil inside diameters can be either 508mm or 610mm, maximum coil outside diameter is 2000mm. Weight of a single coil can be from 5 to 30 metric tons.
    5.The specification of ASTM such as A653M, A792M, A875M / A924M and etc. have been updated to the latest revisions.
    ITEM CGI HGI
    THINKNESS 0.2mm ~ 1.6mm 1.5mm ~ 6.0mm
    WIDTH 914mm ~ 1824mm
    INNER DIMENSION 610mm / 508mm
    WEIGHT 5 ~ 30MT(MAX)
    ZINC MASS 80 ~ 350g/m2

    JIS

    G3302

    ASTM

    A525-93

    ASTM

    A525M-91a

    ASTM

    A653-95

    ASTM

    A653M-95
    Z08 ~ Z35 G40 ~ G140 Z120~ Z350 G40~G115 Z120~ Z350
    ZINC FINISH REGULAR SPANGLE / MINISPANGLE / EXTRA-SMOOTH AND GALVANNEALED
    SURFACE TREATMENT CHROMATED TREATED / OILED
    EQUIVALENT SPECIFICATION JIS ASTM

    JISG3302
    SGCC
    SGC340
    SGC400

    A526-90
    A446-93
    GRAGE
    A,B,C,D1,D2
    A527-90

    LFQ

    A526M-90
    A446M-93
    GRADE
    A,B,C,D1,D2
    A527-90

    LFQ

    A653-95
    CQ
    SQ33
    SQ37
    SQ40
    SQ50
    CLASS1
    CLASS2
    CLASS3

    LFQ

    A653M-95
    CQ
    SQ230
    SQ255
    SQ275
    SQ340
    CLASS1
    CLASS2
    CLASS3

    LFQ
     

    JISG3302
    SGHC
    SGH340
    SGH400

    SGH440    		 ASTM USE THE A653 / A653M SPELICATION FROM 1994
    REMARKS 1. ALL PRODUCTS CAN BE SKIN PASSED
    2. PLEASE INQUIRE OUR MARKETING DEPARTMENT FOR PRODUCT SPECIAL SPECIFICATIONS
     
     
    离心机|离心机网|无锡离心机|离心机价格 樱花热水器维修|林内热水器维修|能率热水器维修|上海史密斯热水器维修 直升机坪,直升机停机坪,直升机坪设计,直升机停机坪设备,直升机坪设计安装,直升机停机坪设计,直升机停机坪设计安装 上海企业宣传片制作,上海影视广告 上海挂号网|上海网上挂号|上海医院挂号|上海代挂号 直升机停机坪 消防泵|高温泵|泥浆泵|油田注水泵|海水淡化泵 消防泵|高温泵|泥浆泵|油田注水泵|海水淡化泵 Speck|高压泵|高压水泵|高压柱塞泵 洗地机,高压清洗机 上海无线固话|无线固定电话安装|无线座机|免费网络电话|无线传真机|传真通|网络传真 seo,网站优化,网站建设|网页设计|网页制作|网站设计|网站制作,上海seo,上海网站优化,上海网站建设|上海网页设计|上海网页制作|上海网站设计|上海网站制作 上海seo,网站优化,网站建设|百度谷歌优化|关键字排名|网页设计|网页制作|网站设计|网站制作 无锡seo,无锡网站优化|无锡百度优化|无锡谷歌优化 无锡seo|无锡网站优化|无锡网站建设|无锡网站制作|无锡网页设计|无锡网络公司 无锡网站建设|网页设计|网页制作|网站设计|网站制作 无锡环境检测|室内环境检测|无锡装修污染检测|空气废气TVOC检测(甲醛|苯)检测|无锡废水|辐射|噪音检测 上海会展服务|展台搭建|展台设计|展览公司 展台设计|搭建|上海展台设计|上海展台展会服务|上海展览公司|国外展台设计|展会设计与搭建 上海搬家公司|上海搬场公司|大众搬场|大众搬家|大众搬家公司|上海搬场公司|上海大众搬家|上海大众搬场|上海大众搬家公司|上海大众搬场公司 无锡投影机|无锡投影机维修|投影机换灯泡|投影机除尘 杭州监控,监控安装,监控设备,远程监控系统,视频监控摄像头,门禁,安防 无锡农产品批发|无锡农产品交易|无锡农产品价格|无锡现代农业 租房网|房屋出租信息|二手房出售 toushi眼镜|toushi扑克|麻将|白光眼镜|白光麻将|扑克|toushi扑克眼镜|麻将眼镜 冰蓝服装鞋帽饰品商城|服装批发|童装批发|鞋帽批发|饰品批发 冰蓝服装鞋帽饰品商城|服装批发|童装批发|鞋帽批发|饰品批发 无锡物流公司|中铁物流,中铁快运|物流|货运|物流网|物流公司|货运公司|佳吉物流|货物运输|货物运输公司 中铁物流,中铁快运|物流|货运|物流网|物流公司|货运公司|佳吉物流|货物运输|货物运输公司|无锡物流公司 玻尿酸|玻尿酸填充|瘦脸|绣眉|一整瘦脸|飘眉|除皱|经典韩式定妆-CICI韩式妆容工作室 长株潭信息网|长株潭餐饮美食|休闲娱乐|打折信息|长株潭规划|长株潭人才网|长株潭一体化|长株潭公交 |长株潭汽车站|长株潭房产网|长株潭城际铁路 上海LG冰箱维修|上海松下冰箱维修|上海三星冰箱维修|上海海尔冰箱维修|上海夏普冰箱维修|上海伊莱克斯冰箱维修|上海西门子冰箱维修|上海上菱冰箱维修上海容声冰箱维修|上海新飞冰箱维修 中国模具网|模具培训|模具网 USB Flash Drive wifi mobile phone usb flash drive 整形整容|brava隆乳|隆胸|丰胸|丰胸产品|丰胸美乳|美容 brava隆乳|隆胸|丰胸|丰胸产品|丰胸美乳|美容 上海商务酒店预订|上海国际机票预订|上海高尔夫旅游|上海会议服务 上海跑腿网|上海跑腿|跑腿服务|上海跑腿公司|上海医院挂号|代医院挂号|代发传单 obama,health care,health care plan,obama s health care plan 爱就在一起|爱就宅一起全集|爱就宅在一起在线播放观看|爱就在一起大结局 搞笑图片|QQ表情|qq搞笑图片 恶搞图片|qq恶搞图片|恶搞美女图片|明星恶搞图片 搞笑图片|QQ表情 搞笑儿童|儿童qq搞笑图片|儿童搞笑图片 动物搞笑图|动物搞笑表情|qq动物搞笑表情 节日表情|qq节日表情|qq搞笑表情 美女表情|美女qq表情图片|美女qq表情|qq美女表情包|美女搞笑qq表情 QQ表情|搞笑图片 上海浦东搬家,上海浦东新区搬场公司,上海浦东搬家公司 上海嘉定搬家,上海嘉定区搬场公司,上海嘉定搬家公司 上海宝山搬家,上海宝山区搬家公司,上海宝山搬家公司 上海长宁搬家,上海长宁区搬场公司,上海长宁搬家公司 上海闵行搬家,上海闵行区搬场公司,上海闵行搬家公司 上海黄浦保洁,上海黄浦区搬场公司,上海黄浦保洁公司 上海静安搬家,上海静安区搬场公司,上海静安搬家公司 上海杨浦搬家,杨浦区搬场公司,上海杨浦搬家公司 上海虹口搬家,上海虹口区搬场公司,上海虹口搬家公司 上海闸北搬家,上海闸北区搬场公司,上海闸北搬家公司 上海徐汇搬家,上海徐汇区搬场公司,上海徐汇搬家公司 上海松江搬家,上海松江区搬场公司,上海松江搬家公司 上海卢湾搬家,上海卢湾区搬场公司,上海卢湾搬家公司 上海普陀搬家,上海普陀区搬场公司,上海普陀搬家公司 上海奉贤搬家,上海奉贤区搬场公司,上海奉贤搬家公司 美哈儿童用品|儿童用品批发|儿童用品网|儿童用品专卖店|儿童用品店|儿童学习用品|儿童用品加盟店


    Beijing Yajabey International Co.,Ltd. Yajabey Corporation Limited
    Copyright © Yajabey All Rights Reserved.